Tripple - Cut, Fill & Protect

What better way to welcome the new season—our favorite season, we might add—than by giving your pride and joy a thorough detail? Tripple, our all-in-one car polish, is the ideal companion for a complete vehicle cleanse.

Available in 250ml, 500ml, and 1-litre bottles, our formula is specially designed for a thorough deep clean. Enriched with Brazilian No. 1 Carnauba wax, it’s incredibly easy to apply, effectively cleaning the paint's surface while simultaneously adding a protective wax layer—all in one simple step.

The cleaning action of Tripple is intensive, effectively eliminating stubborn oxidation and contaminants with powerful cleansing solvents. It refines the paint's surface to achieve a deep, wet, glossy finish that lasts just over a month. Additionally, it leaves behind ultra-slick film formers that help conceal and glaze over minor defects.

It's the go-to product for detailers looking for an exceptional finish without the extra time investment. Use it on its own, or if you have a bit more time, as a base for our Tough Coat sealant or any of our Carnauba waxes.

Now for the application: Before using Tripple, ensure your car is clean, dry, and free of contaminants. Tripple is applied during the finishing stage as a polish that also provides added protection.

When applying by hand, you can use either a microfibre applicator or the white side of our dual foam applicator pad—both are equally effective. Just apply a few drops of the product (about the size of a small coin) onto your chosen applicator and gently work it into the paint using light pressure and circular motions. Once the residue begins to turn clear, let the product haze for a few minutes before buffing it off completely with a microfiber towel. We recommend working in small sections at a time, approximately 18x18 inches.

For a high-gloss finish or when working with especially soft paint types, use the black side of the Dual Foam applicator pad.

When using Tripple with a machine polisher, apply the product to a light foam finishing or polishing pad. Spread it over a small section of the paint (about 18x18 square inches) at the lowest setting. Work the product in with slow, overlapping passes, applying light pressure at a moderate speed (around 4000 OPM). Once the residue begins to turn clear, lower the speed to the lowest or second-lowest setting and reduce pressure for an additional pass. Allow the residue to haze for a few minutes before buffing it off with a microfibre towel.

For rotary machine polishers, apply a few drops of product to a light foam finishing or polishing pad, then spread it over an 18x18 square inch area of paint at the lowest speed setting. Gradually increase the speed to a maximum of 1000 RPM, working the product in with slow, overlapping passes. Once the residue starts to turn clear, reduce the speed back to the lowest setting for one final pass. Allow the residue to haze for a few minutes before buffing it off with a microfibre towel.

When working with harder paint types, opt for a slightly firmer foam polishing pad.

Our Quick Tips:

- Avoid applying Tripple in high heat, as this can cause the product to cure too quickly, leading to streaking.

- If you find the product challenging to buff off, try using one of our quick detailers to soften it and facilitate the process. Rest assured, this will not compromise the wax protection layer you’ve just applied.

- Auto Finesse Tripple all-in-one polish can be used independently or as a base for Tough Coat or any of our Carnauba waxes.